Electronic central single-phase water heater TRITON. Made in England * suitable for simple (general fuse 40 A) or reinforced single-phase current when the general fuse is at 50 A or 63 A.
Instaflow 7 from Triton with a power of 7.1 kW at 230V with 30.8A (7.7kW at 240V)
It is of relatively low power compared to other GENEM models, and its performance in winter with an inlet temperature of 10 C and an outlet temperature of 40 C will be 3 to 3.5 liters per minute.
With advantages of inverter technology: That is, constant temperature and lower consumption than simple rapid heaters as it uses only the necessary power to heat the water to the desired temperature.
It is connected in parallel (not in series) with other sources of hot water, e.g. solar or boiler as in the drawings
ENERGY CLASS “A”
The smart solution for demands…and energy savings
MORE ECONOMIC in power consumption by 30 to 40% compared to non-electronic rapid heaters and 60 to 70% compared to classic water heaters.
E.g. the device can work by automatically reducing its power, measuring inlet-outlet temperature in relation to the water flow and use e.g. 5 kw or 9 kw ……..
The operating power and consumption is controlled by the electronic brain according to the temperature and flow of the incoming water, to select the desired temperature and keep it constant.
The selected temperature varies between 20 C and 55 C, adjusted with the rotary switch
USE Single or multiple e.g. bathroom, shower, sink, wash basin
Flow switch – activates the device only when there is water flow.
Safety thermostat – protection against overheating
Outlet temperature sensor: Same for the outlet
Dimensions: H 36 cm (with threads), W 24 cm, 32 W 8 cm
English BEAB Approvals – CE Marking – IP 25 Protection
Made in England
