Clage central single-phase water heater. Made in Germany *
CEX 6/9 by Clage (220-240V)
With advantages such as inverter technology: That is, constant temperature and lower consumption than simple rapid heaters as it uses only the necessary power to heat the water to the desired temperature.
ENERGY CLASS “A”
Clage can and does produce rapid heaters with a pressure resistance of 10 bar when the Chinese ones on the market can withstand 6 bar!
Single-phase electronic rapid heater CLAGE CEX 6/9
The smart solution for demands…and energy savings
COMPATIBLE WITH SOLAR OR BOILER (Water inlet up to 70 degrees Celsius)
It can be placed in line with them taking the existing warm water thus achieving even greater economy.
If the CEX will be the only source of hot water, the following applies in any case:
MORE ECONOMIC in power consumption by 30 to 40% compared to non-electronic rapid heaters and 60 to 70% compared to classic water heaters.
E.g. the device can work by automatically reducing its power, measuring inlet-outlet temperature in relation to the water flow and use 2 or 5 kw or in between ……..
Inverter
Also available is a remote control with temperature indicators and other settings for more comfortable use and remote adjustment.
CLAGE CEX easy and simple: Electronic instant heater for providing hot water conveniently and economically from the hot taps.
The operating power and consumption is controlled by the electronic brain according to the temperature and flow of the incoming water, to select exactly the desired temperature and keep it constant.
The selected temperature varies between 20 C and 55 C, is set with touch buttons and is displayed on the large screen, where the operation and programming options are also visible.
In the menu, you can see the consumption in kw at any time!
One device with all maximum power options (6.6 and 8.8 KW).
Two programming keys for setting temperature values, activating the temperature limit, as well as operating and setting \ programming menu.
2 temperature memories that you can easily set for each use:
Example: 1 for a temperature of 35 0C for hand washing and 2 for a temperature of 42 0C for a shower or
at any other temperature you wish.
USE Single or multiple e.g. bathroom, shower, sink, wash basin
Flow switch – activates the device only when there is water flow.
Safety thermostat – protection against overheating
Inlet temperature sensor: checks and shows on the screen if you choose it, the temperature of the water entering the device.
Outlet temperature sensor: Same for the outlet
Flow meter in liters per minute with display available
Power meter (in kw) – You can see on the screen how many kw the CEX is working in from the menu.
Dimensions: H 29 cm (with threads 31 cm), W 17.5 cm, D 10.5 cm
German VDE – GS approvals. CE – EMC marking. IP 25 protection
Made in Germany
